White Anti Droplet Transmission 3M 8210 Respirator Mask
3M 8210 Respirator Dustproof Breathable Droplet Industrial Dust Head-mounted
How to wear a cup-type anti-particulate mask:
3M filter material, soft nose pad, adjustable nose clip, activated carbon layer to
reduce the odor of organic vapor. Professional filter material, efficient protection
of dust and particles, the design of aluminum strip fits each different nose shape
Ergonomic Design - Durable & stretchable straps with dual point attachments,
ensuring reliable protection. High-quality elastic ear bands are comfortable to
wear for long periods .
Obtained China LA certification, performance in line with GB2626-2006 KN95
protection level US certification NIOSH R95
| Type | 8210 Mask Facial Protection |
| Differnece | Different protection levels, different wearing methods, different styles (foldable, integrated) |
| Material | Non-woven Fabric,Heat-sealing Sponge,Melt-blown Fabric |
| Certificate | CE FDA |
| Usage | Anti-dust ,Anti-fog,Anti-haze,Anti-PM2.5, Anti-germs |
| Color | white |
| MOQ | 20pcs/bag |
| Capacity | 1 million pieces per day |
8210
Prevent PM2.5, prevent flu, prevent decoration odor,
prevent automobile exhaust particulate matter, prevent automobile exhaust gas odor,
prevent second-hand smoke particulate matter, prevent second-hand smoke gas odor,
prevent barbecue smoke mixture particulate matter,
prevent barbecue smoke mixture gas odor, and prevent diesel Vehicle exhaust mixture particulate matter, prevent diesel vehicle exhaust mixture gas odor
Before wearing the protective mask, use both hands to stretch the headband every 2 to 4 cm.
(This is only applicable to 8210). Other types of headband do not need to be pre-stretched.
Hold the mask with your hands, place the nose clip at your fingertips, and let the headband
hang down naturally.
With the nose clip facing upwards, support the chin with a mask, pull the upper headband
over the top of the head and place it at a higher position behind the head, and pull the lower
headband over the top of the head and place it under the back of the neck and ears.
Put the tips of your fingers on the top of the metal nose clip, use both hands to press inward
and move to both sides to shape the nose bridge. Note that pinching the nose clip with one
hand will cause improper fit and reduce the protective effect of the mask. Please use both hands .
Before entering the work area, the user must check the tightness of the mask with the face, and
cover the mask with both hands to avoid affecting the position of the mask on the face. If the mask
has no exhalation valve, exhale quickly, if the mask is exhaled Valve, inhale quickly. If the air leaks
from the bridge of the nose, you should wear the mask again. If there is no leak, you can enter the
work area to work.
